Controlling the Local (Near) Site System

Set Camera Presets

Before you begin, make sure the camera icon in the upper right corner of your TV screen is pointing toward you. If it is pointing away from you, press the NEAR button on your remote.
  1. Clear old camera presets by pressing SELECT, then #.
  2. Steer camera using ARROWS and ZOOM.
  3. Press SELECT to display presets, then a number 0-9.
  4. To go to a preset, simply press a number 0-9.
back to top of page

PIP (Picture-in-Picture) Swap

If you use only one TV monitor with your Polycom, your near site image (what you are sending to the remote site) will appear in a small picture-in-picture in the lower right corner. You can swap the near site and remote site views.
  1. Press NEAR button to display PIP swap.
  2. Press SELECT to swap local and far site view.
back to top of page

Select Auxiliary Cameras

Note: Once you select an auxiliariary source (document camera, VCR, second PTZ camera), you can make that source a Camera Preset (see Camera Preset section). You can also perform a PIP swap on that source.
  1. Press NEAR button to display Aux sources.
  2. Press Right Arrow to select document camera, VCR, etc.